Product Center
The solid-liquid separator uses the principle of centrifugal separation for decontamination. Since the inlet pipe is installed at an eccentric position of the cylinder, when water passes through the inlet of the cyclone separator, it first forms a downward oblique circumferential flow along the tangential direction of the cylinder. The water rotates and moves downward, and when it reaches a certain part of the cone, it then rotates upward along the axis of the cylinder. Finally, it is discharged through the outlet pipe.
SCF-SY Hand Crank Brush Filter
The hand-cranked brush filter is a simple and efficient filter, composed of a filter cylinder, stainless steel mesh (wedge wire mesh, perforated mesh), a stainless steel brush with a handle, a pressure gauge, a drain valve, and other components. When impurities accumulate on the filter mesh, a pressure difference occurs between the inlet and outlet. When the pressure difference reaches the process requirement, cleaning is required. During cleaning, there is no need to disassemble any parts of the filter; simply open the drain valve and rotate the handle 3-4 turns to easily achieve effective cleaning.
The SCF-Y type filter is a small device used to remove solids contained in liquids. It can protect compressors, pumps, and other equipment and instruments to ensure normal operation and functioning, achieving a stable process and ensuring safety. Additionally, it plays a very important role in improving product quality. The Y-type series filters are suitable for steam, air, kerosene, water, weakly corrosive gases, and liquids.