Product Center
The core part of the filter is the filter element. The filter element consists of a filter frame and a stainless steel wire mesh. The stainless steel wire mesh is a consumable part and requires special protection.
Can be used as a pre-separation device before fine filters or bag filters, which can reduce the consumption of fine filters or bag filters, extend the life of the filtration system and water treatment system, and reduce maintenance downtime and filter material replacement costs.
SCF-QP Full-process Integrated Water Treatment Device
The SCF-QP series integrated water treatment device is developed to address the four common problems in various circulating water systems: corrosion, scaling, bacteria and algae, and water quality deterioration. It is an integrated water treatment device that replaces the treatment process requiring multiple devices with a single unit, thereby replacing traditional treatment methods. It features comprehensive water quality optimization, scale prevention and removal, corrosion inhibition, sterilization and algae elimination, and ultra-clean filtration functions. With an electromechanical integrated design and purely physical treatment methods, it requires no chemical agents, has low resistance, high flow rate, very low operating costs, simple operation, and easy maintenance.
When raw water containing hardness ions passes through the resin layer inside the water softener, calcium (Ca2+) and magnesium (Mg2+) ions in the water are exchanged and adsorbed by the resin, while an equivalent amount of sodium (Na+) ions are released, thereby reducing the hardness of the raw water.
Ultraviolet sterilizers, according to their biological effects, can be divided into UV-A (320-400nm), UV-B (275-320nm), UV-C (200-275nm), and vacuum ultraviolet parts. In water treatment, the UV-C part of ultraviolet light is actually used, and it has been confirmed that around 260nm in this band is the ultraviolet light with higher sterilization efficiency.